HOLCOMB MOTORSPORTS INC

Steeda's control arm relocation kit raises the front roll center of the vehicle, which becomes lower as a result of lowering the vehicle with lowering springs.

Fits 2005-09 Mustang GT and V-6 Improves handling, allows total camber adjustment

Pro Street Single Adjustable Lower Control Arm Easy 1 hour Installation Chrome Moly Tubing .083 Wall Thickness

Replaces factory 3 bolt tensioner that is prone to bending and breaking Helps reduce belt slip 50% Thicker tensioner arm Recommended for vehicles with manual transmissions Works with both 6 and 8 rib belt systems Brushed Satin Finish

Pro Series Double Adjustable Upper Control Arm, 3rd Link Mount and Spherical Bushing

Pro Street Double Adjustable Upper Control Arm and 3rd Link Mount Pro Street Double Adjustable Upper Control Arm: 1/4" Thick U Bracket and Gussett Tig Welded in Billet Steel Fixture

Fits 2005-2010 Mustang GT, GT500 and V-6 Direct OEM replacement Eliminate flex, controls wheel hop and body roll Fully adjustable for pinion angle which greatly improves traction

Extreme Series Bumpsteer Kit Fits GT and Shelby GT500

Easy 30 minute install CNC Machined Billet Aluminum Prevents Oil from Entering Intake Improves Fuel Economy Can measures 4.75" x 2.5"

Double Adjustable. Easy 2 hour installation

Pro Street Double Adjustable Upper Control Arm 1/4" Thick U Bracket and Gusset Tig Welded in Billet Steel Fixture Heavy Duty 1 1/4" Thick Turnbuckle

Easy 2 Hour Install Chrome Moly Tubing Tig Welded in Billet Steel Fixtures High Gloss Silver Powder Coated Finish Energy Suspension Poly Urethane Bushings Urethane Bushings

Easy 1 hour Installation Chrome Moly Tubing .083 Wall Thickness Brackets and Bushing Tube made from 1/4" thick material Tig Welded in Billet Steel Fixtures High Gloss Silver Powder Coated Finish

Pro Street Solid Upper & Lower Control Arm Package Easy 2-3 hour Installation Chrome Moly Tubing .083 Wall Thickness

Pro Street Double Adjustable Panhard Bar Double Adjustable Energy Suspension Bushings Made from Chrome Moly Tubing

Pro Series Double Adjustable Panhard Bar Double Adjustable Heavy Duty Heim Joints and Aluminum Bushings

TCI LINELOCK KIT FOR 05/06 MUSTANGS. PRE BENT TUBING MAKES INSTALLATION A BREEZE.

fits 07-10 gt500

Steeda has designed and engineered a new 13" rear disc brake kit for S197 Mustangs and new GT500. The new kit has been developed utilizing the knowledge gained from Steeda's vast competition.

This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) fuel rail, sandwiched between the rail and the OEM fuel pressure sensor. The fuel block seals with OEM-style O-rings, so no gaskets or sealants are required.

Fits 2005-up v6 mustangs

FITS 2005-2006 MUSTANG. DOES NOT FIT 2007

If you feel the need for speed, get the Drag Pack from Ford Racing

FORD RACING 05/08 IMPROVED HANDLING STRUTS AND SHOCKS DESIGNED FOR LOWERED VEHICLES.

FORD RACING CAMS Give any 3-valve 4.6l or 5.4L a lopey idol reminiscent of 1960's muscle cars, no one will believe it's a modular engine SOLD AS A PAIR The most powerful cams available that are safe with production valvetrain

Fits 2005-2009 Mustang GT Fully functional - forces outside cold air into the factory or aftermarket air box System attaches directly to the engine

Unlike the competition, Ford Racing Power Upgrade Packages are 50 State Street Legal and covered under WARRANTY when Ford or Lincoln Mercury Dealer installed and certain conditions apply.

Complete Rear Suspension Upgrade for S197 Mustangs... When you need the Power to meet the Pavement!

Single or Double Adjustable Available

Single or Double Adjustable Available

AIRAID Intake System; Cool Air Dam System Type; Incl. Intake Tube; Installs In 30 Minutes;

Designed to work with the factory computer or one of today?s aftermarket programmers

All BBK 2005-2008 Mustang GT throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application.

NEW!! Edelbrock E-Force Mustang supercharger systems for the 4.6L 3V will allow you to boost your Mustang to an AWESOME 466 hp and 439 ft.-lbs. of torque!!!

Urethane bushings and rear mount to eliminate shifter rail flex * Designed for direct bolt-in installation, eliminating the need for any modifications COMPARE OUR PRICE TO THE OTHER MAIL ORDER GUYS.. THE ONES THAT CLAIM TO HAVE THE BEST PRICE!

BBK Performance mid X pipes are specifically designed to be used with BBK full length headers to complete the installation to the cat back exhaust system.

Got wheel hop on your S197 Mustang? Looking to get it under control without breaking the bank? Steeda's cost effective Stop The Hop Pak is for you!

Fits 2005-2009 Convertible Mustangs.

Service Kit for Ford Racing 2005-2010 Mustang GT and V6 5-Speed Short Throw Shifters:

2005-2010 Mustang Rear Adjustable Control Arm Package Replaces the stock upper and lower control arms Both Upper and Lower Control Arms are Double Adjustable Relocation Brackets Corrects Instant Center Geometry

Ford Racing Shift Knob inscribed with 5-speed pattern.

Fits 2005-2010 Mustang V6

Designed to work with the factory computer or one of today?s aftermarket programmers

2005 and Newer Ford Mustang, including V6, GT, and Shelby GT500 This convenient billet adapter mounts directly to the factory (or aftermarket equivalent) driver's side fuel rail, sandwiched between the rail and the OEM fuel pressure sensor.

Spencer Performance introduces an 05 and up Mustang GT belt tensioner pulley. Replace your stock black stamped steel spinner with this precision machined pulley

PERFORMANCE AUTOMATIC DEEP ALUMINUM TRANS PAN KIT FOR 2005/UP MUSTANG GT

We spent countless hours fiquring out where the S197 Mustangs could benefit most from chassis stiffening. Here is the end result

Fits: Ford 4.6L, 3 Valve Modular Engine Mustang

PERFORMANCE AUTOMATIC FLEXPLATE KIT FOR 4.6 3V ENGINES WITH AN 8 BOLT CRANK

PERFORMANCE AUTOMATIC FLEXPLATE FOR 4.6 3 VALVE ENGINES WITH STD 6 BOLT CRANKS

MAX STREET/STRIP CAM W/VERY ROUGH IDLE. NEEDS LOWER GEARS. EXHAUST UPGRADES, CUSTOM COMPUTER PROGRAMMING AND A 3000 STALL W/ AUTO.

SERIOUS STREET PERF. W/ROUGH IDLE. NEEDS LOWER GEAR, PROGRAMMER AND 2500 STALL FOR AUTOMATICS

New production cylinder head castings

Production 3V cylinder head

Production 3V cylinder head

Fits 2007 Mustang GT with MANUAL or AUTOMATIC transmissioN Produces 400 hp with 93 octane at approximately 5 psi of boost

Fits 2005-2006 Mustang GT with MANUAL or AUTOMATIC transmissioN Produces 400 hp with 93 octane at approximately 5 psi of boost

FITS 07 GT MUSTANG WITH MANUAL TRANSMISSION. WILL NOT FIT 2008 MUSTANGS

FORD RACING.FITS 2007 GT. Produces 550 hp at 600 RPM with 93 octane at approximately 11 psi of boost! FREE SHIPPING!!! Produces 542 lb-ft of torque at 4400 rpm

FORD RACING.FITS 2008-09 GT. Produces 550 hp at 600 RPM with 93 octane at approximately 11 psi of boost! FREE SHIPPING!!! Produces 542 lb-ft of torque at 4400 rpm

8 PT Roll Bar 2005-2009 Mustang

8 PT Roll Bar 2005-2009 Mustang

Need to reduce wheel hop and improve traction? The Steeda adjustable upper 3rd link for S197 Mustangs gives you the ability to set your pinion angle and eliminate the torque deflection associated with the factory piece

ALL STAINLESS KIT INCLUDES POWER X CROSSOVER AND RACE MUFFLERS.FOR 05/MUSTANG V6

2.5 " DIA MODULAR ALUMINIZED STEEL POWER X PIPE WITH CONVERTORS FOR 2005/ MUSTANG GT AOD AND FREE 48 STATE SHIPPING!!

2.5 " DIA MODULAR ALUMINIZED STEEL POWER X PIPE WITH CONVERTORS FOR 2005/ MUSTANG GT 5 SPD AND FREE 48 STATE SHIPPING!!

2.5 " DIA 5 PC MODULAR STAINLESS STEEL POWER X PIPE WITH CONVERTORS FOR 2005/ MUSTANG GT AOD

2.5 " DIA 5 PC MODULAR STAINLESS STEEL POWER X PIPE WITH CONVERTORS FOR 2005/ MUSTANG GT 5 SPEED

CNC precision drilled - mill slotted SOLD A S A PAIR -Dissipates water for better performance and safety in rain -Precision drilled holes vent super heated gases, eliminating brake fade

SATIN FINISH A/C KNOBS TO REPLACE FACTORY KNOBS ON 2005/ MUSTANG. ALSO AVALIABLE IN POLISHED.

The CUP HOLDER BEZEL brings back the shine to your otherwise bland interior. The CUP HOLDER BEZEL installs in seconds and gives you the show car shine that you are looking for. The CUP HOLDER BEZEL is available in both satin or polished finish

SATIN FINISH BILLET BULLET STYLE DOOR PINS.

SATIN FINISH BILLET HEADLAMP KNOB REPLACES YOUR FACTORY KNOB.

Dress up the plain looking factory mirror controls in your 2005-2008 Mustang with this Billet Mirror Control Bezel Kit. The kit includes a knob cover for the mirror control and the trim ring bezel for the mirror controls.

Buttons are sold INDIVIDUALLY. If your car has 2 Power seats, you need to buy 2 Buttons. Here is a very nice addition to Billet Seat Tilt Levers.

FITS ALL 2005/ POWERPOINT PORTS.

This new 2 inch round Billet Aluminum shift knob fits all stock 2005-2009 5 speed Mustangs. Features a flat top with a GT engraving. Fits 12mm threads. Available in satin or mirror polished finish

Dress up that plain shifter area with our all new Billet Shifter Bezel. Fits both automatics and manual transmission cars. A great way to add to the billet look of your interior. Available in satin and polished finish

Complete Manual Rack Fab Kit - Custom widened offset Flaming River rack and pinion, Billet rack mount, steering shaft, splined rack adapter, 3/4" steering u-joint, outer tie rod bump steer kit.

FITS 05 UP MUSTANGS. THESE HAVE ALREADY PRODUCED 1.33 60 FT TIMES

05 UP RACE K-MEMBER FOR MANUAL RACK WITH 1/2 IN LOWER MOTOR MOUNTS FOR EXTRA CLEARANCE WHEN RUNNING BLOWERS.

RACE K-MEMBER FOR USE WITH OE POWER RACK. EXCLUDED OE POWER RACK.

Tubular subframe connectors are made from 1.75" diameter DOM tubing and 3/16" laser cut mounting plates

CHROME PLASTIC BEZEL FOR 3RD BRAKE LIGHT ON 05-09 STANGS.

The BEST complete air intake upgrade for 2005+ Mustang GT. C/L's "Street" kit flows 1003 CFM in "unrestricted" (tuning required) configuration,

COVERCRAFT CUSTOM FIT EVOLUTION 4 CAR COVER KEEPS YOUR BABY COVERED AND PROTECTED AGAINST THE ELEMENTS

Deluxe interior pedals for the Mustang

CDC's GT Overlay Grille is designed for the 05-09 Mustang GT.

The CDC Hood Strut Kit is an engineered component that eliminates the need for a factory hood prop rod and is designed to work on all 2005-2010 Mustangs.

Deluxe interior pedals for the Mustang

Classic Design Concepts 05-09 V6 Billet Aluminum Grille for your Mustang.

The V6 Chin Spoiler is manufactured using high pressure RIM technology and urethane material. Designed to enhance the factory fascia while maintaining factory fit, finish and OE quality.

POWDERCOATED BLUE

INSPIRED BY THE 2008 FRP COBRA JET MUSTANG. LASER CUT METAL SNAKE WITH FLAMES PAINTED RED, WHITE AND BLUE.

Take the complexity and mystery out of wiring a late model 4.6L 3V engine! Designed to run M-6007-A463NA and M-6007-3V46 4.6L 3 Valve crate engines

Take the complexity and mystery out of wiring a late model 5.4L 4V supercharged engine! Designed to run M-6007-C54 and M-6007-TVS 5.4L supercharged crate engines

The CDC windstop (windscreen) is designed around the curvature of the CDC Light Bar, but can be used with out it also.

MOROSO 2005/ MUSTANG Direct bolt-in replacement to stock 2 piece plastic tank Uses factory stock vented cap, bleeds pressure like the factory intended

GT.V6. and SHELBY GT500 The only flash tuner on the market with support for most cold air intake manufacturers right out of the box.

State-of-the-art finishing process utilizes a high-quality, polyester TGIC black powder-coat

LOWERS CAR APPROX 1.5 INCHES AND IMPROVES CORNERING AND HANDLING

RELOCATES FOG LAMPS TO GIVE YOUR STAMG THAT "ELEANOR" LOOK

FLUIDYNE ALUMINUM DIRECT FIT RADIATOR FOR 05-07 MUSTANG 4.6 MANUAL TRANNY.. GET THE BEST FOR YOUR STANG.

Easy upgrade to enhance the appearance of your 2005-08 Mustang

The Cobra Jet tachometer is the newest compliment to the full line of Ford Racing gauges. Featuring the Cobra Jet logo this is the exact tach/shift light combo used in the 2008 Mustang Cobra Jet

HAWK HPS STREET PERFORMANCE BRAKE PADS

2005 and Newer Ford Mustang, Shelby GT500

Includes all lines fitting and hardware necessary for installation. Two Ford Gt Pumps, Rails, Fore Fuel Hat, and MDM jr. Will support up to 1000hp with triple pump and MDM upgrade.

2005 Newer Mustang, Shelby GT500 (2 Driveshaft Loops) This complete kit contains two separate loops, one for each section of the two-piece driveshaft found on the 2005 and newer Ford Mustang.

Mid-Mount Plate, Ford Modular Engine 4.6L, 5.4L and 6.8L, 30" wide, Steel

Keeps Supercharged Engines Running Cooler

Improved spark energy and voltage output Patented winding design and materials Direct bolt-in to factory connectors

Mufflers, Stainless Steel, Natural, Polished Tips, 2.5 in. Inlet, Mustang GT, 4.6L, Pair 05-09

All BBK 2005-2008 Mustang throttle bodies are designed to increase airflow and improve horsepower from between 7-12 HP depending on vehicle and application.

Fits 2005-2009 Mustang GT

Fits 2005-2009 V6 Mustangs Only

Fits 2010 v6 mustang

Fits 2005-2009 v6 mustang

Heritage styling combined with today's technology and engineering resulted in the creation of this OE quality grained Classic Deck Lid Trim Panel.

Engineered and Manufactured by CDC, the GT Aggressive Chin Spoiler is produced using High Pressure Injection Molded technology.

Fits 2005-2009 Mustang GT only

Fits 2005-2009 Mustang GT only

THIS KIT IS COMPLETE WITH AIR TO AIR INTERCOOLER, INJECTORS, AND PROGRAMMER

SOLD INDIVIDUALLY. EXTERNALLY ADJUSTABLE VALVING FOR OPTIMUM TUNING AT THE TRACK. FOR CARS W/O SWAY BAR BRKT

2005 UP MUSTANG REPLACEMTN FILTER. WASHABLE

OEM FORD GEARS FITS FORD MUSTANG/F-150/RANGER WITH AN 8.8

fITS 2005-UP mustang

The bar is supplied with brackets that are mounted to the B pillars which receive the Light Bar, creating a sturdy mount while stiffening the body. Within a couple hours your Mustang will be ready for the next convertible day.

Steeda Aluminum Driveshaft - V6 MANUAL - '05-'09

Steeda Aluminum Driveshaft - AUTO - '05-'09

If you're running full drag slicks, you need Steeda's new Driveshaft Safety Loop. This NHRA compliant safety device keeps the driveshaft from digging into the ground and reduces the chance of cockpit entry in the event of a driveshaft breakage.

Steeda's new competition upper 3rd link for S197 Mustangs is the ultimate piece for the performance Mustang enthusiast. This competition upper 3rd link, like the original version allows you to adjust your pinion angle

Steeda Aluminum Driveshaft - GT500 - '07-'09

steeda aluminum driveshaft v6 auto 05-09

Stop your OEM belt tensioner bracket from bending with Steeda's new Tensioner kit!

Steeda's Billet Front Brake Duct Kit is designed to fit both the Steeda 2005+ Competition Front Fascia and the Stock 2005 + Front Bumper cover.

Steeda once again has taken it to the next level with their brand new Hardcore Billet Anti-Roll-Bar for the S197 Mustangs! Keep your car flat and rear tires planted for faster and more consistent 60 foot times!!

Steeda Billet Pedal Covers - Manual Trans - '05-'09

Steeda's all new Billet Aluminum Pro Street shift handle. Made from Billet 6061 aluminum and features a steel 12mm - 1.75 threaded stud.

Steeda's all new Billet Aluminum Pro Street shift handle. Made from Billet 6061 aluminum and features a steel 12mm - 1.75 threaded stud.

Steeda's brand new strut mount covers are the perfect addition to any engine bay. It's designed to fit over the top of the strut on all S197 Mustangs with stock or aftermarket fixed valve struts, (will not work with Tokico D-specs).

Steeda's brand new strut mount covers are the perfect addition to any engine bay. It's designed to fit over the top of the strut on all S197 Mustangs with stock or aftermarket fixed valve struts, (will not work with Tokico D-specs).

Billet Strut Tower Brace - GT Only - '05-'10

Billet Strut Tower Brace - 3.4 L Whipple SC - '05-'10

Billet Strut Tower Brace- Whipple Supercharger - '05-'10

Steeda's Patented Billet Aluminum intake spacer is designed specifically for the V8 S197 Mustang. Made from Billet 6061 aluminum it is designed to give you more plenum volume for increased horsepower.

Correct Your Bumpsteer with this Bumpsteer Kit that features spherical rod-ends with tapered shafts for a hassle-free installation that requires no drilling of the spindle for fit.

These Chrome Moly alloy steel rear lower trailing arms directly replace the stamped steel OE parts.

A great step towards improved handling out back is to upgrade the panhard bar supplied by the manufacturer with our chrome-moly steel unit.

Steeda's competition proven rear swaybar for S197 Mustang is a direct replacement larger diameter bar that provides pro championship level handling performance.

Steeda?s Stage II drag pak suspension package is an inexpensive upgrade from a good foundation laid in Stage I.

This performance package is designed with straightline performance in mind. Typical improvement is 4 to 6 tenths in the 1/4 mile.

Steeda introduces our new Economy Charge Motion Control Delete Plates for the S197 Mustangs. These plates are factory O.E. castings without the restrictive butterflies in each port for improved airflow.

Engine Plenum Cover - '05-'09. Note: Will not fit with aftermarket strut tower braces.

Unlimited tuning of your front swaybar is yours with these double adjustable endlinks from the leaders in Ford suspension dynamics!

This kit was designed to replace the factory Hydra mount bushing that is located at the rear attachment point of the front control arm assembly of the S197 Mustang

Steeda's Stage 1 suspension package will enhance the appearance of your vehicle and dramatically improve handling without sacrificing ride quality.

Stage 2 picks up where Stage 1 leaves off. This kit will further improve the suspension providing greater off the line and corner exit traction, improved tuneable shock valving, and better steering response.

Steeda's proven suspension components that combined will improve cornering grip, handling balance, reduce brake dive, reduce body roll and stiffen the front chassi

Steeda's proven suspension components are combined and offered here in a matched package that will improve cornering grip, handling balance, reduced brake dive, reduced body roll

REPLACES OEM FLIMSY BRACKET

Securely anchor your rear swaybar with these massive attachments! Eliminate flex found in the OE endlink mount. Designed for use with OE swaybar,

Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels

Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels

Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels

Steeda's new Cold Air Kit for the S197 produces the greatest power gains of any Cold Air Kit on the market. Testing has shown increases of up to 38 HP and 30 ft lbs of Torque to the rear wheels

Looking for a more cost effective alternative to higher priced 1-piece aluminum driveshafts? This steel driveshaft is your answer!

Steeda Race Only Lower Control Arms - '05-'10

Further limit g-loading with a Steeda Rear Shock Tower Brace. Stainless steel hardware including teflon lined rod ends included. A great complement to a coil-over system; will yield a stiffer chassis regardless of your suspension choice

Steeda once again has taken their product to the next level. Steeda's new rear swaybar relocation bracket for S197 Mustangs

The tool is designed specifically for the Ford 3 Valve cylinder heads spark plugs

Spherical Bearing for S197 Mustang

Steeda's Street Sport Roll bars are the perfect roll bar for the street enthusiast

Springs are the foundation of good handling and ride quality. So start with the best springs for you Mustang, built by a company that specializes in your Mustang!

Upgrade the appearance under hood with a Steeda Stainless Steel Radiator Cover. Choose the brushed or polished version - each is supplied with a tube of silicon for a simple, tool-free installation!

Steeda offer the ultimate front brake upgrade for your 2005+ Mustang. Tested and proven in competition and on the street.

This upper 3rd link uses our track proven three piece bushing package on the axle end to help reduce axle wind up, wheel hop, and allow proper articulation without deflection for improved handling and cornering stability

If your 'stang is going to see street duty, with an occasional trip down the strip, then these adjustable lower trailing arms are just the ticket!

Steeda's double bar Chrome-Moly Alloy Steel strut tower brace is a great addition to your S197 Mustang. With 2 bars made of chrome moly steel instead of regular mild steel you get double the strength over competitive mild steel braces.

Get the proven naturally aspirated power package that took our Steeda Torch Red Q to 12.72 at 108 on drag radials and road race suspension!

Steeda Upper 3rd Link - Lowered Vehicle - '05-'10

Steeda Upper 3rd Link - Stock Ride Height - '05-'10

Steeda's X5 balljoints are designed to raise the roll center of your 2005-07 Mustang which becomes lower as a result of lowering with lowering springs.

ADD A DISTINCTIVE LOOK TO YOU 2005-2009 MUSTANG WITH THESE STICK ON CHROME PLASTIC TAILLIGHT BEZELS.

Bolt-In Rear Anti-Roll Bar / Panhard Bar Assembly

Fits 2005-2009 Mustangs

Fits 2005-2009 Mustangs

these side scoops come unpainted and are not available painted.

* SFI 2PC Pulley Set * 1 Hour Install * SFI 18.1 Approve Balancer * Gains of up to 12 Horsepower * Gun Drilled Water Pump Pulley * Satin Finish

Chrome-Moly panhard brace 30 minute install Replaces factory stamped brace Girdle Strengthens center section Silver Powdercoat finish

Wheel Studs, Press-In, 1/2-20 in. RH Thread, Ford, Mustang 2005-08, Front, Set of 5